Bed-of-Nails Fixtures Ecosystem

Bed-of-Nails ICT Fixture Vendors

The fixture is where most ICT programs succeed or fail. A bed-of-nails assembly has to deliver reliable contact force to every test point on the board — often several thousand of them — across hundreds of thousands of actuations, without deflecting the assembly enough to cause false opens. Get the mechanical design wrong and you spend the product's life chasing intermittent failures that no amount of program tuning will fix.

This directory indexes the fixture builders and component suppliers covering the full assembly: probe plates and receptacles, spring-loaded pogo pins, vacuum actuation hardware, press-fit and dual-stage mechanisms, and complete turnkey fixtures built from CAD data. The choice between vacuum and mechanical actuation usually comes down to board size, expected volume, and how much deflection the assembly can tolerate.

Vendors here range from houses that build complete fixtures to a customer's board data, to suppliers of the consumable probe and pin components, to companies that do both. Fixture houses that also develop the test program are worth prioritising — it removes the usual finger-pointing when a first-article fixture fails to correlate.

Bed-of-Nails Fixtures vendors in the directory: QA Technology Company, Inc., SEGGER Microcontroller GmbH, Test Technology Associates (TTA) and Testing House Texas.

39 vendors matched

Email Verified New

QA Technology Company, Inc.

ICT Fixtures & Accessories

QA Technology Company, Inc. specializes in the precision fabrication of high-quality contact pogo pins for ICT and functional test fixtures, alongside comprehensive test system interfaces. We are dedicated to providing robust, reliable interconnect solutions that meet the demanding requirements of modern electronics manufacturing and test environments.

Location N/AN/A
Featured

SEGGER Microcontroller GmbH

ICT Software & Programming

Globally recognized manufacturer of J-Link JTAG/SWD debug probes, Flasher in-system programmers, and embedded software tools. Produces fast JTAG interface hardware widely utilized for boundary scan testing, hardware debug, and production flash programming.

Monheim am Rhein, GermanyN/A

Test Technology Associates (TTA)

ICT Service Providers

Operating since 1982, Test Technology Associates is a leader in in-circuit programming and ICT. Offers turn-key ICT fixture design, test program generation (Keysight 3070, Teradyne TestStation, GenRAD 228x), Takaya flying probe test development, boundary scan programming, and rapid board testing services.

Carrollton, Texas, USAN/A

Testing House Texas

ICT Service Providers

Texas regional facility of Testing House, Inc., serving electronics OEMs and EMS providers across Texas and the US Southwest. Provides localized ICT fixture manufacturing, program development, flying probe testing, boundary scan programming, and technical support.

Carrollton, Texas, USAN/A

Testing House, Inc.

ICT Service Providers

Founded in 1992, Testing House is a global leader in turn-key PCBA testing solutions. Specializes in ICT fixture development and test program generation (Keysight 3070, Teradyne TestStation, GenRad 228x), flying probe testing, boundary scan (JTAG IEEE 1149.1/1149.6) integration, DFT analysis, and functional/system testing services.

Fremont, California, USAN/A

Celestica Inc.

ICT Service Providers

Global EMS leader offering advanced hardware platform solutions with integrated ICT, flying probe testing, boundary scan, and functional test development.

Toronto, CanadaN/A

ATE Solutions Ltd

ICT Service Providers

UK-based test engineering specialist delivering turnkey ICT program generation, fixture design, and sub-contract PCBA testing services.

Blisworth, United KingdomN/A

East West Manufacturing

ICT Service Providers

Global design and manufacturing company offering custom PCB assembly, ICT test programming, fixture development, and quality assurance services.

Atlanta, Georgia, USAN/A

Forwessun

ICT Service Providers

Global independent test engineering firm specializing in turnkey ICT fixture manufacturing (Keysight, Teradyne, GenRad), test program development, and contract testing.

Liverpool, United KingdomN/A

Datest

ICT Service Providers

ISO 9001/AS9100-certified PCBA testing lab offering specialized Keysight 3070 and Teradyne ICT program development, fixture design, and contract test services.

Fremont, California, USAN/A

Creation Technologies

ICT Service Providers

Medium-to-high complexity EMS provider offering tailored ICT test development, bed-of-nails fixture deployment, and automated inspection services.

Boston, Massachusetts, USAN/A

SigmaTron International

ICT Service Providers

Full-service EMS provider offering in-circuit testing (Keysight 3070, Teradyne), flying probe testing, and custom automated test development.

Elk Grove Village, Illinois, USAN/A

FEINMETALL GmbH

ICT Fixtures & Accessories

German manufacturer of spring-loaded contact probes and precision test fixture interfaces for in-circuit and functional PCB testing.

Herrenberg, GermanyN/A

FixturFab

ICT Fixtures & Accessories

Modern, web-based manufacturer of custom PCB bed-of-nails test fixtures and rapid-turn fixture kits configured via an online studio.

San Francisco, California, USAN/A

ATX Hardware GmbH

ICT Fixtures & Accessories

Major European supplier of custom test fixtures, bed-of-nails adapters, and cassette systems for Keysight, Teradyne, and SPEA testers.

Pürten / Landsberg am Lech, GermanyN/A

Custom Test Products (CTP)

ICT Fixtures & Accessories

Manufacturer of ICT fixture kits, vacuum fixtures, interface receivers, and bed-of-nails test fixture accessories.

Anaheim, California, USAN/A

PTR HARTMANN GmbH

ICT Fixtures & Accessories

Manufacturer of high-precision spring contact probes, probe receptacles, and test fixture components for electronic assembly testing.

Werne, GermanyN/A

Konrad Technologies GmbH

ICT Fixtures & Accessories

Integrator and manufacturer of custom ICT test fixtures, mass interconnect receivers, and bed-of-nails fixture cassettes.

Radolfzell, GermanyN/A

ATES GROUP / ATES Fixtures

ICT Fixtures & Accessories

French manufacturer specializing in ICT bed-of-nails test fixtures, vacuum fixture kits, and custom test adapters.

Grenoble, FranceN/A

Testronics

ICT Fixtures & Accessories

Produces ICT test fixtures, pin cards, grid interface receivers, and test fixture kits for bare and loaded PCB testing.

Richardson, Texas, USAN/A

Everett Charles Technologies (ECT) / Cohu

ICT Fixtures & Accessories

Pioneer of POGO spring probes, ICT fixture kits, dense-grid bed-of-nails fixtures, and wireless fixture solutions for Keysight and Teradyne testers.

Poway, California, USAN/A

Circuit Check Inc.

ICT Fixtures & Accessories

Industry-leading manufacturer of custom ICT test fixtures (vacuum, pneumatic, mechanical) compatible with Keysight 3070, Teradyne, TRI, and CheckSum platforms. Services division: Offers comprehensive test engineering services including custom ICT test program development, fixture setup, and automated test cell integration.

Maple Grove, Minnesota, USAN/A

INGUN Prüfmittelbau GmbH

ICT Fixtures & Accessories

Global leader in spring contact test probes, ICT fixture kits, cassette systems, and customization accessories for automated circuit testing.

Konstanz, GermanyN/A

SOFtronix GmbH

ICT Software & Programming

European software provider specializing in DfT analysis and automated test program generation tools for flying probe and bed-of-nails ICT systems.

Nuremberg, GermanyN/A

SurplusGLOBAL, Inc.

Used/Refurbished ICT Equipment

Major global secondary semiconductor and PCB equipment marketplace, dealing in pre-owned flying probe and bed-of-nails ICT testers.

Yongin-si, Gyeonggi-do, South KoreaN/A

Vayo Technology

ICT Software & Programming

Developer of Vayo-Test Expert software for automated ICT / Flying Probe test program generation, CAD/Gerber conversion, and 3D DfT analysis.

Shanghai, ChinaN/A

SMTNET

Used/Refurbished ICT Equipment

Online portal and equipment exchange network connecting buyers and sellers of pre-owned SMT assembly, ICT testers, and fixture kits.

San Jose, California, USAN/A

Teradyne, Inc.

ICT Equipment Manufacturers

Major automated test equipment manufacturer producing the TestStation and Spectrum Series ICT systems (incorporating legacy GenRad technology), optimized for high-volume PCBA manufacturing.

North Reading, Massachusetts, USAN/A

Acculogic Inc.

ICT Equipment Manufacturers

Develops and manufactures Sprint ICT, Flying Scorpion flying probe systems, and ICT 7000 bed-of-nails test platforms for electronics and EV battery markets.

Markham, CanadaN/A

Digitaltest GmbH

ICT Equipment Manufacturers

German manufacturer of ICT platforms including the MTS 300 bed-of-nails test system series, Condor flying probe ICT tester, and Phoenix software environment.

Stutensee, GermanyN/A

Keysight Technologies

ICT Equipment Manufacturers

Global technology leader producing the Medalist i3070 Series In-Circuit Test (ICT) systems, widely regarded as the industry benchmark for high-density board testing, parallel testing, and advanced boundary scan integration.

Santa Rosa, California, USAN/A

Seica S.p.A.

ICT Equipment Manufacturers

Manufactures the Compact SL bed-of-nails tester and Pilot V8 Flying Probe ICT systems, delivering flexible, high-speed testing for complex electronics assemblies.

Strambino (Turin), ItalyN/A

SPEA S.p.A.

ICT Equipment Manufacturers

Leading European ATE manufacturer offering the 3030 Series bed-of-nails in-circuit testers and 4080 multi-gantry flying probe test systems for analog, digital, and power PCBA testing.

Volpiano (Turin), ItalyN/A

Takaya Corporation

ICT Equipment Manufacturers

Pioneer of flying probe ICT technology, manufacturing industry-standard APT-1400F and APT-1600FD high-speed flying probe test systems (distributed globally via TEXMAC).

Ibara, JapanN/A

Hioki E.E. Corporation

ICT Equipment Manufacturers

Japanese test equipment manufacturer producing FA1220 and FA1240 flying probe and bed-of-nails in-circuit testing systems for unpopulated and populated PCB testing.

Ueda, JapanN/A

CheckSum LLC

ICT Equipment Manufacturers

Specializes in high-throughput parallel in-circuit test systems (e.g., 12KN ICT), multi-function test systems, and integrated In-System Programming (ISP) solutions.

Arlington, Washington, USAN/A

Test Research, Inc. (TRI)

ICT Equipment Manufacturers

Major Asian test and inspection equipment manufacturer offering the TR5001, TR518, and TR5001T Series high-speed in-circuit test systems for SMT production lines.

Taipei, TaiwanN/A

Landrex Technologies Co., Ltd.

ICT Equipment Manufacturers

Taiwanese manufacturer of in-circuit test systems, bed-of-nails testers, and automated inspection equipment for high-volume SMT factories.

New Taipei City, TaiwanN/A

Elmotek S.r.l.

ICT Equipment Manufacturers

Italian developer of automated test systems, specializing in compact in-circuit test equipment, custom ATE systems, and functional test fixtures.

Vedano al Lambro (MB), ItalyN/A

Common questions

Should I choose a vacuum or a press-fit fixture?

Open

Vacuum fixtures clamp the board evenly and handle large, dense panels well, so they suit high test-point counts and thin boards. Press-fit and mechanical actuation avoid vacuum plumbing, fit into smaller footprints and deploy faster on short runs or where shop air is unavailable. Decide on board size, expected annual volume, and how much board deflection the assembly tolerates.

How many actuations before probes need replacing?

Open

Spring probes are typically rated for 100,000 to 1,000,000 actuations depending on series and contact force. In practice replacement is driven by contact resistance drift and visible wear on the plunger tip as much as by cycle count.

What is the lead time for a new fixture?

Open

A first-article bed-of-nails fixture usually runs three to six weeks from released CAD data and a netlist. Dual-stage designs, very high test-point counts, and first-time builds for a new platform take longer.

What board data does a fixture builder need?

Open

Gerber and drill data, the netlist or test-point list, assembly drawings, a bare board or known-good assembly for reference, and the ICT platform plus pin-card configuration. Board thickness tolerance and keep-out areas matter as much as the CAD files.

Can fixtures still be built for legacy platforms?

Open

Yes. Several builders keep libraries and mechanics for GenRad 228x, Agilent 3070 and early Teradyne TestStation platforms, though probe hardware and interface kits may come from the secondhand market.

How do probe force and deflection affect first-pass yield?

Open

Each probe needs a minimum contact force to break through oxide and hold contact; summed across a dense board that force can bow the assembly and open joints elsewhere. Good fixture design balances total force against support-pin placement so the board stays flat under load.