JTAG Boundary Scan Ecosystem

JTAG Boundary Scan Vendors

Boundary scan has moved from a debugging convenience to the only practical way to test the solder joints under a BGA. When a package has no accessible probe points, physical access disappears and the nets behind it become invisible to a bed-of-nails fixture. IEEE 1149.1 boundary scan recovers that coverage by driving the device's own I/O cells and observing the result — and for fine-pitch, high-density assemblies it is frequently the only structural test available.

This directory indexes the vendors that supply boundary scan tooling, from full development environments to embedded controllers and programming hardware. Their products differ most in three areas: standard coverage (whether they support only 1149.1, also 1149.6 for AC-coupled differential nets, or IJTAG 1687 for embedded instruments), the level of integration with ICT platforms like Keysight 3070 and Teradyne TestStation, and whether in-system programming is part of the same toolchain or a separate purchase.

Buyers sourcing boundary scan typically arrive with one of three problems: a new design with no probe access, a legacy program needing BGA coverage it never had, or a production line that wants to combine test and device programming in a single pass. The vendors below can be filtered against your platform and capability requirements before you request a quote.

JTAG Boundary Scan vendors in the directory: SEGGER Microcontroller GmbH, Test Technology Associates (TTA), Corelis, Inc. and ASSET InterTech, Inc..

13 vendors matched

Featured

SEGGER Microcontroller GmbH

ICT Software & Programming

Globally recognized manufacturer of J-Link JTAG/SWD debug probes, Flasher in-system programmers, and embedded software tools. Produces fast JTAG interface hardware widely utilized for boundary scan testing, hardware debug, and production flash programming.

Monheim am Rhein, GermanyN/A

Test Technology Associates (TTA)

ICT Service Providers

Operating since 1982, Test Technology Associates is a leader in in-circuit programming and ICT. Offers turn-key ICT fixture design, test program generation (Keysight 3070, Teradyne TestStation, GenRAD 228x), Takaya flying probe test development, boundary scan programming, and rapid board testing services.

Carrollton, Texas, USAN/A

Corelis, Inc.

ICT Software & Programming

Leading supplier of JTAG boundary scan test tools, ScanExpress software suite, boundary scan hardware controllers, and in-system programming systems. Tools are widely utilized for board design verification, production testing, and field diagnostics.

Cerritos, California, USAN/A

ASSET InterTech, Inc.

ICT Software & Programming

Developer of the ScanWorks platform for non-intrusive boundary scan test (IEEE 1149.1, 1149.6, IJTAG IEEE 1687) and high-speed bus debug. Delivers hardware and software tools for board-level testing, FPGA programming, and processor-controlled test (PCT).

Plano, Texas, USAN/A

Testing House Texas

ICT Service Providers

Texas regional facility of Testing House, Inc., serving electronics OEMs and EMS providers across Texas and the US Southwest. Provides localized ICT fixture manufacturing, program development, flying probe testing, boundary scan programming, and technical support.

Carrollton, Texas, USAN/A

Flynn Systems Corporation

ICT Software & Programming

Developers of onTAP Automated Boundary Scan Test Software. Supplies software and hardware tools for IEEE 1149.1/1149.6 compliant boundary scan test generation, fault diagnosis, automatic test pattern generation (ATPG), and ISP device programming.

Nashua, New Hampshire, USAN/A

Testing House, Inc.

ICT Service Providers

Founded in 1992, Testing House is a global leader in turn-key PCBA testing solutions. Specializes in ICT fixture development and test program generation (Keysight 3070, Teradyne TestStation, GenRad 228x), flying probe testing, boundary scan (JTAG IEEE 1149.1/1149.6) integration, DFT analysis, and functional/system testing services.

Fremont, California, USAN/A

JTAG Technologies B.V.

ICT Software & Programming

Global leader devoted exclusively to JTAG boundary scan testing, IEEE 1149.1/1149.6 software development, hardware controllers, and In-System Programming (ISP) solutions. Provides seamlessly integrated boundary scan packages for major ICT platforms, flying probers, and functional test systems.

Eindhoven, NetherlandsN/A

XJTAG Ltd.

ICT Software & Programming

Premier provider of IEEE 1149.x boundary scan test systems and In-System Programming solutions. Offers the XJTAG Development System, XJInvestigator, XJRunner, and XJLink hardware interfaces for quick fault isolation on complex BGA circuit boards.

Cambridge, United KingdomN/A

Lauterbach GmbH

ICT Software & Programming

World's leading manufacturer of hardware-assisted microprocessor debug and trace tools (TRACE32). Provides high-speed JTAG/SWD debug probes, boundary scan test integration scripts, and in-system flash programming tools for microprocessors and microcontrollers.

Höhenkirchen-Siegertsbrunn, GermanyN/A

GOEPEL electronic GmbH

ICT Equipment Manufacturers

World-renowned vendor of Embedded JTAG Solutions, including SYSTEM CASCON boundary scan software, JTAG controllers, and automated optical/X-ray/in-circuit test equipment. Supports IEEE 1149.x, IEEE 1532, IJTAG IEEE 1687, and embedded functional test.

Jena, GermanyN/A

Celestica Inc.

ICT Service Providers

Global EMS leader offering advanced hardware platform solutions with integrated ICT, flying probe testing, boundary scan, and functional test development.

Toronto, CanadaN/A

Keysight Technologies

ICT Equipment Manufacturers

Global technology leader producing the Medalist i3070 Series In-Circuit Test (ICT) systems, widely regarded as the industry benchmark for high-density board testing, parallel testing, and advanced boundary scan integration.

Santa Rosa, California, USAN/A

Common questions

What is the difference between JTAG and boundary scan?

Open

JTAG is the IEEE 1149.1 interface standard; boundary scan is the test methodology built on it. JTAG defines the four-wire TAP port and the instruction set a compliant device exposes, while boundary scan uses those instructions to drive a device's I/O cells and observe what comes back on the board.

Can boundary scan replace in-circuit test?

Open

Rarely. It typically supplements ICT, covering nets a bed-of-nails fixture cannot probe — the joints under BGAs, fine-pitch connectors and high-density assemblies. Most production programs run both, splitting coverage by what each does best.

What is the difference between IEEE 1149.1 and 1149.6?

Open

1149.6 extends 1149.1 to AC-coupled differential nets such as PCIe and SATA, where a DC-coupled boundary scan cell cannot drive or observe the net. If your boards carry high-speed serial links, confirm the tool supports 1149.6.

What is IJTAG (IEEE 1687)?

Open

IJTAG is the standard for accessing embedded instruments inside a device through the JTAG port — on-chip sensors, monitors and configuration registers that would otherwise need a separate interface. It lets test and validation reach internals without extra pins.

Do boundary scan tools include in-system programming?

Open

Varies by vendor. Several combine boundary scan test and flash or PLD programming in one toolchain, which lets a single pass test the board and program its devices. Others sell programming as a separate product.

Can boundary scan run on a Keysight 3070 or Teradyne TestStation?

Open

Yes. Several vendors integrate directly with these platforms, so boundary scan becomes another test in the same program rather than a separate station. Check that the integration supports your controller and pin-card configuration.